不同粒度猫尾草对羔羊体外发酵特性和微生物数量的影响

通过Rusitec-s体外发酵系统研究不同粒度猫尾草对羔羊体外发酵参数与微生物数量的影响,选取6种不同粒度(1.00、2.36、3.35、4.75、8.00和12.50 mm)的猫尾草作为试验饲粮的纤维来源,按照猫尾草的粒度将试验分为6个处理组,每个处理4个重复,利用Rusitec-s型人工瘤胃模拟装置进行48 h体外发酵,测定养分降解率、发酵参数及发酵液中6种微生物菌群的拷贝数。结果表明：与其他处理组相比,2.36 mm组显著提高了体外中性洗涤纤维降解率(IVNDFD)、丁酸、异丁酸、戊酸、异戊酸摩尔比和溶纤维丁酸弧菌(B. f)数量(P<0.05),且显著降低总产甲烷菌(TMe)数量(P<0.05)。总菌(TB)与氨态氮(NH3-N)浓度、乙酸摩尔比呈正相关(R²=0.84,P=0.038;R²=0.88,P=0.021);B. f数量与丙酸摩尔比呈正相关(R²=0.82,P=0.045),且与pH呈负相关(R²=-0.98,P=0.001);TMe数量与体外粗蛋白质降解率(IVCP...     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.     

THE SIZE EFFECT OF THE FRACTURE ENERGY OF CONCRETE TESTED BY THREE POINT BENDING

This paper ainalyses the size effect of the fracture energy of concrete tested bythree point bending. It is shown that positive errors of test results of fracture energy increase,ornegative errors decrease with increasing of the specimen ize. The phenomenon is one of main causesresulting in the size effect of fracture energy.     

种子大小对冬小麦苗势及其幼穗发育的影响

以中大粒品种郑引1号为试验材料,研究了不同粒重种子对幼苗长势及幼穗发育的影响.结果表明,大粒种子出苗迟,生长发育快,叶片分化持续时间短,幼苗长势壮;大粒种子的幼穗发育开始早,分化强度大,形成小穗数多.茎生叶分化总数不因粒重不同而发生变化.     

高度对色斑法测量雨滴粒径影响的试验研究

以前的色斑法雨滴率定只考虑色斑直径与雨滴真实粒径的关系，忽略了高度对率定的影响。在大量试验的基础上，通过回归分析，得到了以色斑直径和高度为变量的率定公式。研究表明，水滴下落高度小于5m时需考虑高度的影响；高度大于5m时，高度的影响可以忽略。通过相关性分析，公式的拟合性较好，对以后的色宽法测量雨滴粒径有指导意义。     

全射流喷头水力尺寸对运转可靠性

从研究全射流喷头水力尺寸与可靠性的关系入手，寻找提高产品可靠性的方法。提出了影响喷头工作稳定可靠性的主要因素为主射流的附壁时间及主射流的附壁力。探讨了接嘴插拔深度及其内孔直径、作用区位差S、盖板出口位差H1和H2、出口间隙C等关键水力尺寸及其相互之间配合对主射流附壁时间及主射流的附壁力的影响，进而得出对喷头可靠性的影响。最后得出要使喷头运转稳定可靠，需对喷头的水力尺寸进行深入的研究，找出水力尺寸间的最佳组合。     

Irrigation scheduling in a mature peach orchard using tensiometers and dendrometers

Three trickle irrigation schedules, two of which were scheduled according to soil water potential ( soil) (tensiometer method) and daily stem contraction (DSC) (dendrometer method) respectively and the other one was a schedule of restricted water supply, were applied to a mature peach orchard.The annual water application based on soil was greater than that based on DSC. However, tree growth, fruit size and leaf water potential (leaf) on the trees in the dendrometer scheduling plot did not differ from those in the tensiometer scheduling plot while the premature fruit drop and fruit bud initiation were greatly different. The restricted water supply treatment limited significantly both tree and fruit growth. In addition, the lower leaf was observed on the trees in this plot.Further study shows that use of the dendrometer method for scheduling irrigation satisfies the water needs of the plant and that the tensiometer method is less accurate.Abbreviations leaf leaf water potential - soil soil water potential - DSC daily stem contraction - LVDT linear variable displacement transducer - PET potential evapotranspiration     

发动机曲轴的损伤及修复

介绍了发动机曲轴的运行环境,分析了发动机曲轴的损伤形式、损伤部位及特点,简述了曲轴技术状况的检查方法.针对发动机曲轴的损伤程度和不同的损伤类型,给出了修理尺寸法、堆焊、电弧喷涂、电刷镀和手工电弧焊修复工艺,并对堆焊和电刷镀修复工艺进行了详尽地介绍和分析.